SPS Craft

Parallel Flange Rolled Steel Channels

SPS range of parallel flange rolled steel channels offered as standard and non- standard sizes, fully weldable, all material certified to EN 10204 3.1or 3.2 as required, additional NDT and third party inspection available. Full cutting services available.

For further help and advice on the full product range call your local sales office.

Parallel Flange Rolled Steel Channels are supplied as follows:

In standard and non standard sizes
Fully weldable
Yield range from 36Ksi - 50Ksi
Low temperature impact tested at -20oC -30oC
Through thickness “Z” testing available
All material fully certified to EN 10204 3.1 or 3.2 as required
Additional NDT testing and third party inspection available on request
Lengths between 6m - 12m as standard
Longer lengths and a full cutting service available

Request a quote

Specifications

BS EN 10025 S355 J2
ASTM A 572 GR 50
BS 4360 50C, 50D

Parallel Flange Rolled Steel Channels

Available Specifications

Designation Serial Size (mm)	Mass (kg/m)	Depth of Section (mm)	Width of Section (mm)	Web (mm)	Flange (mm)
100 x 50 x 10	10.2	100	50	5.0	8.5
125 x 65 x 15	14.8	125	65	5.5	9.5
150 x 75 x 18	17.9	150	75	5.5	10.0
150 x 90 x 24	23.9	150	90	6.5	12.0
180 x 75 x 20	20.3	180	75	6.0	10.5
180 x 90 x 26	26.1	180	90	6.5	12.5
200 x 75 x 23	23.4	200	75	6.0	12.5
200 x 90 x 30	29.7	200	90	7.0	14.0
230 x 75 x 26	25.7	230	75	6.5	12.5
230 x 90 x 32	32.2	230	90	7.5	14.0
260 x 75 x 28	27.6	260	75	7.0	12.0
260 x 90 x 35	34.8	260	90	8.0	14.0
300 x 90 x 41	41.4	300	90	9.0	15.5
300 x 100 x 46	45.5	300	100	9.0	16.5
380 x 100 x 54	54.0	380	100	9.5	17.5
430 x 100 x 64	64.4	430	100	11.0	19.0